- Beranda
- Ulasan Produk
- Sparepart Motor
- Bodywork
- Spakbor
- Spakbor Depan
- Teksturnya bagus... (Moto Salgo: Front Mudguard)
【Moto Salgo】Front Mudguard Review
The texture is good
I think the quality is good and cosmetic. In other people's review, there is a comment that they licked the head of the Screw, but I think they probably did not use the No.3 Driver. Although it is not very often, I sometimes encounter a large Plus screw that should use the No. 3 driver. The Mud Guard Plus screw is just like that, you should use Phillips Screwdriver No.3, because the screwdriver is ExactlyFit to the screw and there is no sign of licking. And just for reference, I wanted to run 3.00-17 tires that were thicker than OEM, so I didn't buy an OffsetBracket, but instead drilled a hole with a steel drill 10mm offset from the OEM hole position. I like it because I wanted to put on a thicker tire with a more casual lift than the 45mm and 60mm upsets on the market. In addition, the edge of the bracket on the Fender Reverse side for the Mud Guard was also shaved with Grinder to make it flat. I am prepared for the seal peeling of the Mud Guard by other reviewers, and I think it is good to lose it and put on Plain or Parenthesis.
Teksturnya bagus
Saya pikir kualitasnya bagus dan kosmetik. Di review orang lain, ada komentar bahwa mereka menjilat kepala Screw, tapi menurut saya mereka mungkin tidak menggunakan Driver No.3. Meskipun tidak terlalu sering, terkadang saya menemukan sekrup Plus besar yang seharusnya menggunakan driver No.3. Sekrup Mud Guard Plus seperti itu, Anda harus menggunakan Obeng Phillips No.3, karena obengnya Pas dengan sekrup dan tidak ada tanda-tanda menjilat. Dan hanya untuk referensi, saya ingin menjalankan ban 3.00-17 yang lebih tebal dari OEM, jadi saya tidak membeli OffsetBracket, tetapi mengebor lubang dengan bor baja 10mm diimbangi dari posisi lubang OEM. Saya menyukainya karena saya ingin memakai ban yang lebih tebal dengan daya angkat yang lebih kasual daripada ban 45mm dan 60mm yang beredar di pasaran. Selain itu, tepi braket di sisi Fender Reverse untuk Mud Guard juga dicukur dengan Grinder agar rata. Saya siap untuk pengelupasan segel Penjaga Lumpur oleh pengulas lain, dan menurut saya bagus untuk menghilangkannya dan memakai Polos atau Tanda kurung.
Lihat aslinya