- Beranda
- Ulasan Produk
- Sparepart Motor
- Suspensi / Rearset / Velg / Swingarm
- Sparepart Velg
- Tubeless Kit
- Tidak masalah pertama kali jika dipasang dengan ... (OUTEX: Clear Tubeless Kit)
【OUTEX】Clear Tubeless Kit Review
Sesuai: FANTIC Fanatic Caballero Rally 500, ROYAL ENFIELD Interceptor 650, ROYAL ENFIELD Continental GT650, その他
No problem the first time if carefully installed.
Used to make SR400's Rear wheel tubeless.
We installed it not only to reduce weight, but also because we originally had Tire on Tubeless Casting wheel and to eliminate the anxiety of puncture on the road.
The subject of the installation was an SR400 hub with EXCEL's AluminumWide Rim.
The size is 18×MT3.5J. I have the impression that MTRim was not as difficult as I thought it would be, probably because the surface that Nipple sticks to is the back.
I think it was a good thing that it was a new rim, but even so, I smoothed the mating surfaces of the rim with water-resistance paper just in case.
I think a used OEMRim or H-type Rim would increase the difficulty.
Due to the nature of the product, re-installation is quite Large strange, so at least a new Spoke seems like a good idea.
Also, if the RimCenter is narrow, such as almost only the width of the Nipple, the difficulty seems to increase even more.
This was my first installation, but I worked carefully anyway, even if it took some time.
Not included in the kit but necessary are water-resistance paper for leveling the rim joint surfaces and a strong parts cleaner for degreasing.
I was lent WAKOS Parts cleaner by a colleague of mine, as it is said to have a different cleaning power.
It was supposed to be a new rim, but Dustcloth was very dirty, so I thought it was definitely a necessary process.
After installation, the tires were immediately assembled and left at high air pressure.
2.The manual said 5 kilos, but I put in 3.0 kilos because I usually have a habit of setting the Tire higher right after it is built in.
Check two days later and it is still a Large success.
Overall, it is not difficult, but it is depressing that I have to install it on the Front from now on because it was quite Large strange lol.
(even more so since Front is 2.5J)
Tidak masalah pertama kali jika dipasang dengan hati-hati.
Digunakan untuk membuat roda belakang SR400 menjadi tubeless.
Kami memasangnya tidak hanya untuk mengurangi bobot, tetapi juga karena kami awalnya memiliki Ban pada roda Casting Tubeless dan untuk menghilangkan kecemasan tusukan di jalan.
Subjek pemasangan adalah hub SR400 dengan Pelek AluminiumWide EXCEL.
Ukurannya 18×MT3.5J. Saya mendapat kesan bahwa MTRim tidak sesulit yang saya kira, mungkin karena permukaan yang ditempelkan Nipple adalah bagian belakang.
Saya pikir itu hal yang baik bahwa itu adalah pelek baru, tetapi meskipun demikian, saya menghaluskan permukaan kawin pelek dengan kertas tahan air untuk berjaga-jaga.
Saya pikir OEMRim bekas atau Rim tipe-H akan menambah kesulitan.
Karena sifat produknya, penginstalan ulang cukup aneh, jadi setidaknya Spoke baru sepertinya ide yang bagus.
Juga, jika RimCenter sempit, seperti hampir hanya selebar Nipple, kesulitannya tampaknya semakin meningkat.
Ini adalah instalasi pertama saya, tetapi saya tetap bekerja dengan hati-hati, meskipun butuh waktu.
Tidak termasuk dalam kit tetapi diperlukan kertas tahan air untuk meratakan permukaan sambungan pelek dan pembersih komponen yang kuat untuk menghilangkan lemak.
Saya dipinjamkan pembersih WAKOS Parts oleh seorang rekan saya, karena katanya memiliki daya pembersih yang berbeda.
Itu seharusnya pelek baru, tapi Dustcloth sangat kotor, jadi saya pikir itu pasti proses yang perlu.
Setelah dipasang, ban langsung dipasang dan dibiarkan dengan tekanan udara tinggi.
2. Buku manual mengatakan 5 kilo, tapi saya memasukkan 3,0 kilo karena saya biasanya memiliki kebiasaan menyetel Ban lebih tinggi tepat setelah ban terpasang.
Periksa dua hari kemudian dan itu masih sukses besar.
Secara keseluruhan, ini tidak sulit, tetapi menyedihkan bahwa saya harus menginstalnya di bagian depan mulai sekarang karena cukup besar lol aneh.
(terlebih lagi karena Front adalah 2.5J)