- Beranda
- Ulasan Produk
- Sparepart Motor
- Sparepart Stang & Kemudi
- Jalu Stang
- Harga rendah meskipun kompatibilitas luas dan ku... (ACTIVE: Aluminum Bar End Revolver)
【ACTIVE】Aluminum Bar End Revolver Review
Low price despite wide compatibility and high quality ◎
■ Design
The color and design of the Grip were chosen to match the color and design of the Grip. The large bar end is also a good choice, but since the grip installed on the bike is too flashy, we chose the compact Revolver type. I chose the compact Revolver type because the Grip is too flashy.
Performance
It is heavy for its size, but not heavy enough to suppress vibration. I think it is too small to be effective in the event of a fall. In my case, I bought it for fashion, so there is nothing more I can say about its performance.
■Difficulty of installation
This is not my experience because I asked the Shop to install it, but this product seems to be a Type that can be fixed to the Handlebar by inflating the attached RubberSpacer between the Bolt and the Handlebar. Therefore, it is good that it can be used for a wide range of car models. However, in the case of the Grom, there is an OEM Bolt hole, so it seems that the RubberSpacer can be fixed as it is without using it. However, the Throttle side is not the same size as the Spacer, and I was told that it needs to be purchased separately (in my case, the problem was solved by diverting the surplus parts that were generated when replacing the Bar End of the PCX that I had requested together).
Also, in the case of JC75 Grom, it seems that the OEM Bar End is so tightened by the devil's Torque that the Screw Mounts are screwed up, and when removing it, it has to be forcibly removed using a Spanner. Therefore, if you want to keep the OEM bar end on your Beauty, you will have to go through a lot of trouble.
*Please note that the photos include the Grip that was installed at the same time.
Harga rendah meskipun kompatibilitas luas dan kualitas tinggi ◎
■ Desain
Warna dan desain Grip dipilih agar sesuai dengan warna dan desain Grip. Bar end yang besar juga merupakan pilihan yang bagus, namun karena grip yang dipasang pada sepeda terlalu mencolok, kami memilih tipe Revolver yang kompak. Saya memilih tipe Revolver yang ringkas karena Gripnya terlalu mencolok.
Pertunjukan
Memang berat untuk ukurannya, tapi tidak cukup berat untuk meredam getaran. Saya rasa ini terlalu kecil untuk efektif jika terjatuh. Dalam kasus saya, saya membelinya untuk fashion, jadi tidak ada lagi yang bisa saya katakan tentang performanya.
■Kesulitan pemasangan
Ini bukan pengalaman saya karena saya meminta Toko untuk memasangnya, tetapi produk ini sepertinya merupakan Tipe yang dapat dipasang pada Stang dengan cara menggembungkan RubberSpacer yang terpasang antara Baut dan Stang. Oleh karena itu, ada baiknya dapat digunakan untuk berbagai macam model mobil. Namun pada kasus Grom terdapat lubang Baut OEM, sehingga sepertinya RubberSpacer dapat diperbaiki apa adanya tanpa menggunakannya. Namun, ukuran sisi Throttle tidak sama dengan Spacer, dan saya diberitahu bahwa itu perlu dibeli secara terpisah (dalam kasus saya, masalahnya diselesaikan dengan mengalihkan kelebihan bagian yang dihasilkan saat mengganti Bar End PCX yang saya minta bersama).
Selain itu, dalam kasus JC75 Grom, tampaknya OEM Bar End begitu dikencangkan oleh Torsi iblis sehingga Dudukan Sekrupnya kacau, dan ketika melepasnya, harus dilepas secara paksa menggunakan Kunci Pas. Oleh karena itu, jika Anda ingin mempertahankan standar OEM pada Kecantikan Anda, Anda harus melalui banyak masalah.
*Harap diperhatikan bahwa foto menyertakan Grip yang dipasang pada saat yang bersamaan.