- Beranda
- Ulasan Produk
- Sparepart Motor
- Rantai / Gear
- As Stut Kopling
- Menggunakan Material keras saja tidak cukup.... (MARVELOUS ENGINEERING: Clutch Push Rod, Double Flat Version)
【MARVELOUS ENGINEERING】Clutch Push Rod, Double Flat Version Review
Sesuai: KAWASAKI GPZ900R
It is not enough to use hard Material.
This ROD is used when using Clutch release such as ZZr1400
The release part is spherical, and the ROD is usually inserted backwards, but the round tip is used to press the ClutchBearing.
If the clutch is used as it is for many years, the clutch may not be able to be cut due to the displacement of the clutch.
This time, Ryohira can hold Release and ClutchBearing firmly, so it is safe.
The material is not the hard material of other manufacturers, but the same as OEM etc., which eliminates bearing damage.
If you are replacing the Clutch release, you should definitely use it!
Menggunakan Material keras saja tidak cukup.
ROD ini digunakan apabila menggunakan Clutch release seperti ZZr1400
Bagian pelepasnya berbentuk bulat, dan ROD biasanya dimasukkan ke belakang, namun ujung bulatnya digunakan untuk menekan ClutchBearing.
Jika kopling digunakan selama bertahun-tahun, kopling mungkin tidak dapat dipotong karena perpindahan kopling.
Kali ini Ryohira bisa menahan Release dan ClutchBearing dengan kuat, sehingga aman.
Bahannya bukan bahan keras dari pabrikan lain, tetapi sama dengan OEM dll, sehingga menghilangkan kerusakan bantalan.
Jika Anda mengganti pelepas Kopling, Anda harus menggunakannya!