- Beranda
- Ulasan Produk
- Sparepart Motor
- Rangka
- Sparepart Pelindung / Slider Lainnya
- Apakah sulit untuk beberapa model mobil?... (ACERBIS: UniversalLink guard for skid plate)
【ACERBIS】UniversalLink guard for skid plate Review
Is it difficult for some car models?
Zita's Linkage Guard cracked, so I thought I'd buy it again.
I bought this one because it was no longer available.
The product itself looks good, but it is hard to tell from the photo, but when viewed from the side, the LINK side seems to jump up a little against the mounting surface.
I was in a hurry and it was my fault for buying it without checking it carefully.
It doesn't seem to fit my Motorcycle with the LINK lower than the Skid plate.
It may be that a car model with the LINK on the top or ACERBIS skid plate would attach well.
If we reverse the LINK, the position with the LINK looks good, but the rounded shape is turned inside out, so both SIDES stick out at the bottom.
After much deliberation, we decided to attach it backwards and cut the two ends that protrude downward. I was not comfortable with roughly cutting the new one, but it would have been a waste if it did not stick.
The thing is good - but I recommend that you check the angle of the skid plate and the position of the LINK carefully before you buy it.
Apakah sulit untuk beberapa model mobil?
Linkage Guard Zita retak, jadi kupikir aku akan membelinya lagi.
Saya membeli yang ini karena sudah tidak tersedia lagi.
Produknya sendiri terlihat bagus, namun sulit dibedakan dari fotonya, namun jika dilihat dari samping, sisi LINK tampak sedikit menonjol pada permukaan pemasangan.
Saya sedang terburu-buru dan itu adalah kesalahan saya karena membelinya tanpa memeriksanya dengan cermat.
Sepertinya tidak cocok dengan Sepeda Motor saya yang LINKnya lebih rendah dari Skid plate.
Mungkin model mobil dengan LINK di bagian atas atau pelat selip ACERBIS dapat terpasang dengan baik.
Kalau kita balikkan LINKnya, posisi dengan LINKnya terlihat bagus, namun bentuk bulatnya terbalik, sehingga kedua SISInya menonjol di bagian bawah.
Setelah banyak pertimbangan, kami memutuskan untuk memasangnya ke belakang dan memotong kedua ujung yang menonjol ke bawah. Saya merasa tidak nyaman memotong yang baru secara kasar, tetapi akan sia-sia jika tidak menempel.
Barangnya bagus - tapi saya anjurkan Anda memeriksa sudut pelat selip dan posisi LINK dengan cermat sebelum membelinya.