- Beranda
- Ulasan Produk
- OEM Parts
- Generator
- Tampaknya tidak bersifat semi permanen. Jenazah ... (YAMAHA OEM Motorcycle parts: Rotor assembly 3HT-81450-10)
【YAMAHA OEM Motorcycle parts】Rotor assembly 3HT-81450-10 Review
Sesuai: YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400
It does not seem to be semi-permanent. Older bodies are by confirmation.
Flywheel was replaced at the same time when I had the engine overhaul the other day.
The rust was so bad that I thought it could still be used on Flywheel if I polished it, but I was worried about its strength after polishing, so I replaced it.
Flywheel
. bouncing wheel attached to the end of the crankshaft 。 It stores the rotational energy transmitted to the crankshaft, supplies it to the drive wheels, and helps the engine rotate by inertial force.
Not too light ? not too heavy ?.
[Symptoms of a problem with Flywheel
‥
▲Clutch does not disconnect, when Clutch is connected. "Skinny Vibrations and noises with a
▲Idling is not stable and vibration increases.
By the way, in my case, the Idling was going up and down and the vibration was terrible (laughs).
→Rust....
In fact, Flywheels are basically never worn out and can often be used for long periods of time.
*On the other hand, when it becomes unusable, it is rusted, corroded or chipped. In some cases, it can be reused by polishing. However, be careful not to polish it too much because it may lose its balance.
Replacement Procedure] Large body all car models are the same. For reference.
(1) Remove the Flywheel Cover and Sprocket Cover.
↓
Screw in the head of the MagnetFly Wheel Puller.
Prepare for the MagnetFly Wheel Puller because it cannot be removed without it.
↓
(3) Since it is an Opposite Thread Screw, it is tightened by turning it counterclockwise.
↓
Screw in the puller screw. 。 Normal Thread Screw.
↓
(5) Put the Spanner between the Head and the bar, and push the bar down to easily pull it out.
↓
(6) By turning the Shaft of the Puller and pushing in the head of the Crankshaft, the Flywheel comes out in front.
↓
(7) Flywheel is replaced and assembled in reverse order.
[After exchange]
◎Vibration reduction and Idling stabilized.
◎I am also worried about the durability of the Body itself if there is rust, and I am glad that I replaced it.
Idling is unstable due to the weight change caused by the rust and the Flywheel is not rotating and timing its rotation properly.
It is rare to replace a flywheel, but if you feel something is wrong or have an opportunity to open the crankcase, you should check it.
Incidentally, the Lightweight Fly Wheel improves the engine's response when the Axel is turned, and the change in rotation is quicker when the Axel is loosened. 。 RacerSpec. and so on.
In addition, Lightweight Fly Wheel seems to have better acceleration and deceleration performance because less Energy is required to change the Engine speed.
On the other hand, it seems that some people make it heavier in order to increase the sense of pulse...
If the Flywheel is made too light or too heavy, it will not be able to control the Rose Tsuki of the Engine combustion and the Idling will become unstable.
I think the safest thing to do is to replace the OEM.
OEM is 3HT-81450-10 is the part number.
Tampaknya tidak bersifat semi permanen. Jenazah yang lebih tua sudah melalui konfirmasi.
Flywheel diganti bersamaan dengan saat saya melakukan overhaul mesin tempo hari.
Karatnya sangat parah sehingga saya pikir masih bisa digunakan pada Flywheel jika saya memolesnya, tapi saya khawatir dengan kekuatannya setelah dipoles, jadi saya menggantinya.
Roda gila
. roda memantul yang menempel pada ujung poros engkol. Ini menyimpan energi rotasi yang ditransmisikan ke poros engkol, memasoknya ke roda penggerak, dan membantu mesin berputar dengan gaya inersia.
Tidak terlalu ringan? tidak terlalu berat?.
[Gejala masalah pada Flywheel
‥
▲ Kopling tidak terputus ketika Kopling terhubung. "Getaran dan suara kurus dengan a
▲ Pemalasan tidak stabil dan getaran meningkat.
Ngomong-ngomong, dalam kasusku, Idlingnya naik turun dan getarannya sangat buruk (tertawa).
→Karat....
Faktanya, Flywheel pada dasarnya tidak pernah usang dan seringkali dapat digunakan dalam jangka waktu lama.
*Sebaliknya, bila tidak dapat digunakan, ia akan berkarat, terkorosi, atau terkelupas. Dalam beberapa kasus, dapat digunakan kembali dengan memoles. Namun, berhati-hatilah untuk tidak memolesnya terlalu banyak karena dapat kehilangan keseimbangan.
Prosedur Penggantian] Bodi besar semua model mobil sama. Sebagai referensi.
(1) Lepaskan Penutup Roda Gila dan Penutup Sproket.
↓
Kencangkan kepala Penarik Roda MagnetFly.
Persiapkan Penarik Roda MagnetFly karena tidak dapat dilepas tanpanya.
↓
(3) Karena merupakan Sekrup Berulir Berlawanan, maka dikencangkan dengan memutarnya berlawanan arah jarum jam.
↓
Pasang sekrup penarik. 。 Sekrup Ulir Normal.
↓
(5) Letakkan Kunci Pas di antara Kepala dan palang, lalu dorong palang ke bawah agar mudah ditarik keluar.
↓
(6) Dengan memutar Poros Penarik dan mendorong kepala Poros Engkol, maka Roda Gila akan keluar ke depan.
↓
(7) Roda gila diganti dan dirakit dengan urutan terbalik.
[Setelah pertukaran]
◎Pengurangan getaran dan Idling stabil.
◎Saya juga khawatir dengan keawetan Body itu sendiri jika ada karat, dan saya senang bisa menggantinya.
Pemalasan tidak stabil karena perubahan berat yang disebabkan oleh karat dan Roda Gila tidak berputar serta mengatur waktu putarannya dengan benar.
Jarang sekali terjadi penggantian flywheel, namun jika dirasa ada yang tidak beres atau ada kesempatan untuk membuka crankcase sebaiknya dilakukan pengecekan.
Kebetulan, Roda Terbang Ringan meningkatkan respons mesin saat Axel diputar, dan perubahan putaran lebih cepat saat Axel dilonggarkan. 。 Spesifikasi Pembalap. dan seterusnya.
Selain itu, Roda Terbang Ringan tampaknya memiliki performa akselerasi dan deselerasi yang lebih baik karena lebih sedikit Energi yang diperlukan untuk mengubah kecepatan Mesin.
Di sisi lain, nampaknya sebagian orang membuatnya lebih berat demi meningkatkan sensasi denyut nadi...
Jika Flywheel dibuat terlalu ringan atau terlalu berat, maka tidak akan mampu mengendalikan Rose Tsuki pembakaran Mesin dan Idling menjadi tidak stabil.
Menurut saya, hal yang paling aman untuk dilakukan adalah mengganti OEM.
OEM adalah 3HT-81450-10 adalah nomor bagian.