Kembali ke atas

【SUNSTAR】Sprocket Depan

Harga: Rp539,000

*Termasuk PPN 10%
Webike Points: 5,390 pts

Shipping point: 4 pts ( 4 pts x 1qty)
Ubah
DKI Jakarta, Jakarta Selatan, Cilandak
Biaya pengiriman
Rp9,000

    • Pilih varian produk:
    • Nomor Produk:
    • 361-13

Mohon pilih varian produk terlebih dahulu.


Model yang Sesuai:

XR250 97-07

XR250MOTARD 03-07

XR250 97-07

Lihat lebih lanjut

Rincian Produk

Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik Lihat versi asli

[Spesifikasi]

untuk Front
Sesuai Rantai Ukuran : 520

[Bahan]
Kromium-molibdenum Baja (Ferro oksida Film Finishing)

[Warna]
Hitam

[Spesifikasi]
Perawatan panas : carbonitriding Pengobatan
daya tahan : 10000-30000km (*)

[Deskripsi]

Menggunakan dipadamkan dan karat-dicegah berkualitas tinggi abrasi-tahan material, ia akan melakukan ketahanan yang sangat baik. Biasanya, ketika pengobatan carbonitriTeeth diberikan kepada baja, sulit untuk mempertahankan pengukuran yang sangat akurat karena perbedaan dalam tingkat ekspansi dan kontraksi. Sunstar memiliki fasilitas dan teknologi asli untuk melaksanakan perlakuan panas khusus

Daftar spesifikasi yang normal
DepanBelakangRasio penguranganRantaiProdusen kompatibelKendaraan yang kompatibel
gigi 13gigi 413. 15520-102HONDAAX-1 87-
gigi 13gigi 443. 38520-102HONDAXL-GELAR 91-
gigi 13gigi 483. 69520-106HONDAXR250 R 95-96
gigi 13gigi 483. 69520-106HONDAXR250 R 97-
gigi 13gigi 393520-102HONDAXR250 : XR250 BAJA 95-96
gigi 13gigi 403. 08520-104HONDAXR250 : XR250 BAJA 97-
gigi 13gigi 393520-104HONDAXR250MOTARD 03-

[Catatan]

* Gambar ini hanya untuk referensi. Ini mungkin berbeda dari produk yang sebenarnya.
*CATATAN : Mungkin tidak menyesuaikan dengan kendaraan jika jumlah gigi secara signifikan berbeda dari jumlah gigi pada sprocket asli.
* Daya tahan hanya untuk referensi. Ini akan bergantung sangat pada kinerja berkuda, ukuran rantai dan kondisi pemeliharaan.
* Nilai offset dari sproket hanya
* Sebenarnya nilai offset (Vs nilai asli) berbeda karena jenis kendaraan. Jika sproket asli awalnya offset, nilai yang akan dikurangi (Berbeda karena model).
* Bila menggunakan untuk balapan, Anda dapat memilih nilai gigi untuk mencocokkan kursus atau kendaraan. Namun ini hanya berarti bahwa bagian akan sesuai dengan roda OEM digunakan untuk kendaraan yang. Ini tidak berarti bahwa semua gigi didirikan akan dipasang tanpa mengganggu kendaraan. Instalasi untuk setiap kendaraan harus dikonfirmasi di sisi pelanggan.
  • 4.5

    201 Ulasan

  • 5

    Memuaskan

    125

    4

    Bagus

    56

    3

    Lumayan

    15

    2

    Kurang

    1

    1

    Mengecewakan

    4
  • Tulis Ulasan
  • Sunstar Front Sprocket

    2019/01/16

    by Khilaluddin Antony
    Received ordered item Sunstar 15T front sprocket for my CRF250M in good condition. Product looks in very good quality.
  • Hoping for improved fuel economy

    2018/11/29

    by Japan User(translated)
    Since I often run a highway for a long time, I exchanged NORMAL's 17T to 18T in an effort to lower the engine speed even a little.Acceleration at 6th gear is slightly lacking in Punch, but as I thought, it seems that the feeling of losing feeling decreased and it was easier to ride.The biggest change is that Meter's distance meter is shorter by 7%.In someone's blog, I saw articles measuring 17T and 18T speed with Speed ??gun, but there was a case that the 18T speed was very close to the actual speed.Every year when I go to Kyushu, I run all at once to Dannoura, I was up to 1,000 kilometers after Meta's photo up to Net, but if I changed to 18 T, only 930 km would be displayed, this is the exact distance It was a bitter smile with me.The average fuel consumption of the key (Meter display) It was around 17 km to 18 km when it was 17 T, because the value of the distance meter became Small by about 7%, it was about 16 km.I was hoping for a slightly better value for the engine speed drop, but since I often run with skipping, I suppose that I started to run Throttle with a slow feeling as acceleration slowed down.However, 60 km flat road with few signals / If we continue running around h, we will display 22 to 24 kilometers, so it is good.
  • Ideal for CBR 250 RR!

    2018/11/09

    by Japan User(translated)
    I installed it in CBR 250 RR MC 51. There seems to be a User who exchanges Rear only Sprocket in an invisible place in Chain Cover, but OEMDriveSprocket of MC 51 is equipped with rigid Rubber for noise reduction. Since this is the resistance of Friction it is strongly recommended to replace DriveSprocket together!
  • Chromoly

    2018/10/04

    by Japan User(translated)
    Purchase for CBR 250 RR MC 51.There is no lightweight hole like the reference image.Weight is slightly lighter than OEM, but that is because it's no soundproof Rubber arriving at OEMSprocket.
  • Teeth Brush also SUNSTAR

    2018/09/29

    by Japan User(translated)
    【What made you decide the purchase?】? I decided to change it as SUNSTAR, so I purchased 520 Size for Conversion【How was it actually used?】? Unlike STDSprocket, since there is no muffler Rubber, I thought that the running noise would become bigger, I thought I'd run Motorcycle and I listened carefully, but I feel like I got annoyed ...? Although it became lighter weight of about 100 g, it does not understand the difference with DriveSprocketSingle Body【Mounting was difficult?】? Installation is a simple task of removing Nut and exchanging Sprocket, but because it is tightened with a high Torque and locking agent is painted, Tire will run idle just by turning it normally【Please tell me the installation point and hang】? If you use Impact or work with two people, you can exchange it somewhat easier, but in the case of work by one person, you multiply Brake over Motorcycle and use Long Spinner Handle? Because Nut is Crimp in two places, I will raise it with 100 Precision Driver[Is there anything I was disappointed about?]? Because there are many weight reduction holes, there is no stamp of company name or number of teeth. Although it is a place hidden by Cover, I feel a little sad【Hope for Manufacturer ? Please let me know if there are any improvement points]? For Conversion 520 Size, 15T, 16T, 18T and 17T have not been lineuped, so 17T with the same number of teeth as STD is also requested【Have you compared items?】? DRIVEN : Front sprocket[Others]? In the case of R1, Nut can not be reused because it crimps after tightening. Purchasing with Sprocket
201 Ulasan Lihat semua