- Beranda
- Ulasan Produk
- Sparepart Motor
- Bodywork
- Windshield
- Konstruksinya sederhana dan membutuhkan kecerdik... (Puig: Racing Screen)
【Puig】Racing Screen Review
The construction is simple and requires some ingenuity.
I chose this one because I prefer SIDE with Stages.
Installation Nut is an OEMParts 90179-05523. It is not included in the
You can use the OEM's Screen, or you can use the one that comes with the OEM's Screen.
I bought 4 of them at the same time because I wanted to deform and fix the Rubber.
The OEM has claws for hooking near the Mirror and Meter.
To remove it, Mirror must also be removed.
In contrast, this product does not have such a feature, making installation very easy.
On the other hand, since the fixation is not done at the front but only at the rear nut
The front of the Idling also makes a rattling sound when it is shaken by the vibration of the Engine.
As a countermeasure, we use harness tape, which is similar to cloth and leaves little adhesive residue.
The sound has subsided when I have spread it around the perimeter while adjusting it with Scissors.
Vinitae or something like that would be fine, but I think the Harness type would be better because the glue seems to melt at high temperatures.
Overall, it is good, but it would have been better if there had been claws on the front side to hold it in place.
Konstruksinya sederhana dan membutuhkan kecerdikan.
Saya memilih yang ini karena saya lebih suka SIDE dengan Stages.
Kacang Instalasi adalah OEMParts 90179-05523. Hal ini tidak termasuk dalam
Anda dapat menggunakan Layar OEM, atau Anda dapat menggunakan layar yang disertakan dengan Layar OEM.
Saya membeli 4 sekaligus karena saya ingin mengubah bentuk dan memperbaiki Karetnya.
OEM memiliki cakar untuk mengait di dekat Cermin dan Pengukur.
Untuk menghapusnya, Mirror juga harus dihapus.
Sebaliknya, produk ini tidak memiliki fitur seperti itu, membuat pemasangan menjadi sangat mudah.
Di sisi lain, karena fiksasi tidak dilakukan di bagian depan melainkan hanya di bagian belakang
Bagian depan Idling juga mengeluarkan bunyi berderak saat diguncang oleh getaran Mesin.
Sebagai penanggulangan, kami menggunakan selotip, yang mirip dengan kain dan hanya menyisakan sedikit sisa perekat.
Suara mereda ketika saya menyebarkannya di sekeliling sambil menyesuaikannya dengan Gunting.
Vinitae atau sejenisnya tidak apa-apa, tapi menurut saya tipe Harness akan lebih baik karena lemnya sepertinya meleleh pada suhu tinggi.
Secara keseluruhan bagus, tapi akan lebih baik jika ada cakar di sisi depan untuk menahannya.