Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat Semua
400X 13-21 ABS [part used] Front
400X 13-21 [Where used]Front
CB-1 89-91 [Used in]Front
CB250F 15-17 ABS [part used]Front
CB250F 15-17 [Used point]Front
CB400F 13 ABS [part used] Front
CB400F 13 [Where used] Front
CB400FOUR 97-00 [Used point]Front double disk
CB400SF 92-96 [Used point]Front double disk
CB400SF Ver R 95-97 [Used point]Front double disk
CB400SS 02-07 [Used in]Front
CB750 92-08 [Used point]Front double disk
CBF600S 04 [Where used] Front double disk
CBR250R 11-17 *Not available for ABS vehicles [Where used]Front
CBR250R 88-89 [Used in]Front
CBR250RR 17-21 [Where used]Front
CBR250RR 90-99 [Used point]Front double disk
CBR300R 16 [Where used] Front
CBR400R 13-21 ABS [part used] Front
CBR400R 13-21 [Where used]Front
CBR400RR 88-99 [Used point]Front double disk
CBR600F 95-98 [Used point]Front double disk
CL400 98-01 [Used in]Front
GB250 95-99 [Used area]Front
GB350 S 21 [Where used]Front
GB350 21 [Where used]Front
INTEGRA S 14 (750) [part used] Front
INTEGRA 14 (750) [part used] Front
JADE 91-93 [Used area]Front
NC700S 12-13 [Used point]Front
NC700X LD 12-13 [Used point]Front
NC700X 12-13 [Used point]Front
NC750S 14-21 (ABS common) [part used] Front
NC750S 14-21 DCT (ABS common) [part used] Front
NC750X LD 14-21 (ABS common) [part used] Front
NC750X LD 14-21 DCT (ABS common) [part used] Front
NC750X 14-21 (ABS common) [part used] Front
NC750X 14-21 DCT (ABS common) [part used] Front
NC750X 21 NC750XAM RH09
NM4-01 14-16 [Used point]Front
NM4-02 14-16 [Used point]Front
Rebel250 S Edition 20-21 [Where used]Front
Rebel250 17-21 [Where used]Front
Rebel250ABS 17-19 [Used in] Front
Rebel500 17-21 [Where used]Front
ST1100A Pan-European 96-01 *2POT caliper [part used]Front double disc
ST1100A Pan-European 96-01 *2POT caliper [part used]Rear
ST1100 Pan-European 91-99 *2POT caliper [where used]Front double disc
ST1100 Pan-European 91-99 *2POT caliper [part used]Rear
VRX400R100 ROADSTER 95-99 [Used area]Front
VT1300CR 10 [Where used] Front
VT1300CS 10 [Where used] Front
VT1300CX 10 [Where used] Front
VT250SPADA 89-91 [Used in]Front
VTR250 11-16 [Used in] Front
VTR250 98-06 [Used in]Front
V-TWIN MAGNA 94-07 [Used in]Front
XR400Motard 05-07 [Used in]Front
XR400Motard 08 Installed after removing the insulation plate and shims [Where used]Front
SHADOW400 97-07 [Used in]Front
SHADOW750 08 [Used in] Front
SHADOW750 97-03 [Used in]Front
SHADOWACE 96-00 [Used area]Front
Shadow aero 98-01 [Used in]Front
Shadow special 99 [Used at] Front
Shadow slasher750 00-03 [Used point]Front
Shadow slasher 00-06 [Used in]Front
Silver wing400 02-08 ABS [part used]Rear
Silver wing400 02-08 [Used in]Rear
Silver wing 01-08 ABS [part used]Rear
Silver wing 01-08 [Used in]Rear
Silver wingGT400 09 ABS [part used]Rear
Silver wingGT400 09 [Used in]Rear
Silver wingGT600 09 ABS [part used]Rear
Silver wingGT600 09 [Used in]Rear
STEED400 93 (NC26-120-) [part used] Front
STEED400VCL 96-97 [Used area]Front
STEED400VLX 93-02 [Used point]Front
STEED400VSE 96-97 [Used area]Front
STEED600 93-96 [Used area]Front
STEED 01 [Used at] Front
XELVIS 91 [Where used] Front
NIGHTHAWK250 92-99 [Used in] Front
NIGHTHAWK750 91-92 [Used area]Front
PC800 PACIFIC COAST 89-99 [Used point]Front double disk
FUSION 93-03 [Used point]Front
FUSION SE 94-06 [Used in]Front
FUSIONTypeX 03-06 [Used in]Front
FUSIONTypeXX 03-06 [Used in]Front
FREEWAY 93-99 [Used in]Front
MAGNA750 93 [Where used] Front
VALKYRIE 96-01 [Used point]Front double disk
VALKYRIE 96-01 [Used in]Rear
VALKYRIE TOURER 98-01 [Used point]Front double disk
VALKYRIE TOURER 98-01 [Used in]Rear
CB500F
CB500X
CBR500R
Rebel300
Tampilkan lebih banyak
DL250 V-STROM250 17-21 ABS [part used]Front
DL250 V-STROM250 17-21 [Where used]Front
GSF750 96-00 [Used point]Front double disk
GSR250 12-17 [Used point]Front
GSR250F 15 [Where used] Front
GSR250S 14-15 [Used point]Front
GSX250R 17-21 [Where used]Front
RF400R 93-97 [Used point]Front double disk
RF400RV 94-00 [Used point]Front double disk
GSX400 94-98 [Used point]Front double disk
GSX400Type S 94-96 [Used point]Front double disk
GEMMA 08 [Used in] Front
SKYWAVE650 burgman 02-08 *Remove the stock pad back plate [Where used]Front Double Disc
SKYWAVE650 burgman 04-18 ABS *Remove the stock pad back plate [Where used]Front Double Disc
Tampilkan lebih banyak
BW'S125 16-18 (YW125/X) GB11/12 [part used]Front
BW'S125X 16-18 GB11/12 [part used]Front
MT-01 05-06 (5YU1-4) [part used] Rear
CYGNUS X125SR FI 13-15 (1YP2-5) [part used] Front
CYGNUS X125SR FI 16-20 (BF9/B8S) [part used]Front
CYGNUS X 19-21 (B8S1/3/5) [part used]Front
MAJESTY125 01-03 Fi(Taiwan spec) [part used]Front
MAJESTY125 01-03 [Used point]Front
MAJESTYS 14-21 Installed at the same time as the stock shim [Location]Front
Tampilkan lebih banyak
Rincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Webike adalah distributor resmi sepeda motor Brembo Jepang.
[Deskripsi]
[Features ROAD series]
It is characterized by a high coefficient of friction and wear resistance that is stable under any operating conditions (from high to low temperatures), enabling excellent durability.
■LA Compound
Sintered compound for front brakes.
It is characterized by a particularly high frictional efficiency in all operating conditions.
Although its braking force at high temperatures is slightly inferior to that of the SA compound, it has less change in braking force due to temperature changes and has a longer life than the SA compound.
Recommended for those who want to reduce pad replacement cycles and for long touring / commuting use.
[The secret to safe braking is brake pads]
Brembo, the global leader in the brake industry, offers a wide range of high-performance brake pads that employ advanced technologies to improve the safety of braking systems.
By offering a wide range of compounds, from sintered to carbon ceramic, Brembo is able to meet the needs of all disciplines: racing, road, off-road, street and scooter.
The compounds normally used for brake pads can be classified into two systems: sintered metal and organic.
The choice of which compound to use is not solely determined by the intended use.
Different compounds of brake pads can be used for the same application.
■Sintered: SA,LA,SP,SX,SD,XS,GENUINE
A compound produced by compressing metal powder mixed with a lubricant or abrasive at high temperature.
It can be bonded to back plates of any shape without the addition of adhesives in the production process.
The performance of the metal powder is the decisive factor for braking power at high temperatures.
Lubricants help to stabilize the entire braking process and abrasives keep the brake discs clean.
■Carbon Ceramics: RC,CC,TT,GENUINE
It is mainly composed of resin binder, metal powder, lubricant, and abrasive.
The coefficient of friction is determined by the resin binder and metal powder, and the lubricant and abrasive perform the above functions.
■Selection of compound
Every brake pad has its own specific application.The choice of compound depends on the various situations that the brake pads will be dealing with.
For racing use, the brakes must perform at their best at high temperatures, while for street use, the brakes must be highly stable when applied at medium to low temperatures.
■Bite
To check the Initial fitting of brake pad is a particularly important process for all compounds, and is particularly important for racing RC compounds.
Apply the brakes lightly several times with a short interval between the application of the brakes to complete the fitting of the brake pads.
At this time, do not try to force the temperature up by braking.
These generate the correct heating and cooling cycles necessary for the brake system to perform satisfactorily.
The bite time depends on the type of compound, but it is generally longer for organic compounds than for sintered metal compounds.
It is characterized by a high coefficient of friction and wear resistance that is stable under any operating conditions (from high to low temperatures), enabling excellent durability.
■LA Compound
Sintered compound for front brakes.
It is characterized by a particularly high frictional efficiency in all operating conditions.
Although its braking force at high temperatures is slightly inferior to that of the SA compound, it has less change in braking force due to temperature changes and has a longer life than the SA compound.
Recommended for those who want to reduce pad replacement cycles and for long touring / commuting use.
[The secret to safe braking is brake pads]
Brembo, the global leader in the brake industry, offers a wide range of high-performance brake pads that employ advanced technologies to improve the safety of braking systems.
By offering a wide range of compounds, from sintered to carbon ceramic, Brembo is able to meet the needs of all disciplines: racing, road, off-road, street and scooter.
The compounds normally used for brake pads can be classified into two systems: sintered metal and organic.
The choice of which compound to use is not solely determined by the intended use.
Different compounds of brake pads can be used for the same application.
■Sintered: SA,LA,SP,SX,SD,XS,GENUINE
A compound produced by compressing metal powder mixed with a lubricant or abrasive at high temperature.
It can be bonded to back plates of any shape without the addition of adhesives in the production process.
The performance of the metal powder is the decisive factor for braking power at high temperatures.
Lubricants help to stabilize the entire braking process and abrasives keep the brake discs clean.
■Carbon Ceramics: RC,CC,TT,GENUINE
It is mainly composed of resin binder, metal powder, lubricant, and abrasive.
The coefficient of friction is determined by the resin binder and metal powder, and the lubricant and abrasive perform the above functions.
■Selection of compound
Every brake pad has its own specific application.The choice of compound depends on the various situations that the brake pads will be dealing with.
For racing use, the brakes must perform at their best at high temperatures, while for street use, the brakes must be highly stable when applied at medium to low temperatures.
■Bite
To check the Initial fitting of brake pad is a particularly important process for all compounds, and is particularly important for racing RC compounds.
Apply the brakes lightly several times with a short interval between the application of the brakes to complete the fitting of the brake pads.
At this time, do not try to force the temperature up by braking.
These generate the correct heating and cooling cycles necessary for the brake system to perform satisfactorily.
The bite time depends on the type of compound, but it is generally longer for organic compounds than for sintered metal compounds.
Peringatan
[tentang produk yang disertakan dengan kartu anti-pemalsuan]
*Kartu anti-pemalsuan tradisional tidak lagi disertakan dalam paket. Mulai sekarang, silakan daftarkan kode QR yang terlampir pada produk dengan aplikasi "Cek Brembo".
*Mungkin ada perubahan spesifikasi produk karena alasan pabrikan.
*Kartu anti-pemalsuan tradisional tidak lagi disertakan dalam paket. Mulai sekarang, silakan daftarkan kode QR yang terlampir pada produk dengan aplikasi "Cek Brembo".
*Mungkin ada perubahan spesifikasi produk karena alasan pabrikan.
Model yang Sesuai
400X 13-21 ABS [part used] Front
400X 13-21 [Where used]Front
CB-1 89-91 [Used in]Front
CB250F 15-17 ABS [part used]Front
CB250F 15-17 [Used point]Front
CB400F 13 ABS [part used] Front
CB400F 13 [Where used] Front
CB400FOUR 97-00 [Used point]Front double disk
CB400SF 92-96 [Used point]Front double disk
CB400SF Ver R 95-97 [Used point]Front double disk
CB400SS 02-07 [Used in]Front
CB750 92-08 [Used point]Front double disk
CBF600S 04 [Where used] Front double disk
CBR250R 11-17 *Not available for ABS vehicles [Where used]Front
CBR250R 88-89 [Used in]Front
CBR250RR 17-21 [Where used]Front
CBR250RR 90-99 [Used point]Front double disk
CBR300R 16 [Where used] Front
CBR400R 13-21 ABS [part used] Front
CBR400R 13-21 [Where used]Front
CBR400RR 88-99 [Used point]Front double disk
CBR600F 95-98 [Used point]Front double disk
CL400 98-01 [Used in]Front
GB250 95-99 [Used area]Front
GB350 S 21 [Where used]Front
GB350 21 [Where used]Front
INTEGRA S 14 (750) [part used] Front
INTEGRA 14 (750) [part used] Front
JADE 91-93 [Used area]Front
NC700S 12-13 [Used point]Front
NC700X LD 12-13 [Used point]Front
NC700X 12-13 [Used point]Front
NC750S 14-21 (ABS common) [part used] Front
NC750S 14-21 DCT (ABS common) [part used] Front
NC750X LD 14-21 (ABS common) [part used] Front
NC750X LD 14-21 DCT (ABS common) [part used] Front
NC750X 14-21 (ABS common) [part used] Front
NC750X 14-21 DCT (ABS common) [part used] Front
NC750X 21 NC750XAM RH09
NM4-01 14-16 [Used point]Front
NM4-02 14-16 [Used point]Front
Rebel250 S Edition 20-21 [Where used]Front
Rebel250 17-21 [Where used]Front
Rebel250ABS 17-19 [Used in] Front
Rebel500 17-21 [Where used]Front
ST1100A Pan-European 96-01 *2POT caliper [part used]Front double disc
ST1100A Pan-European 96-01 *2POT caliper [part used]Rear
ST1100 Pan-European 91-99 *2POT caliper [where used]Front double disc
ST1100 Pan-European 91-99 *2POT caliper [part used]Rear
VRX400R100 ROADSTER 95-99 [Used area]Front
VT1300CR 10 [Where used] Front
VT1300CS 10 [Where used] Front
VT1300CX 10 [Where used] Front
VT250SPADA 89-91 [Used in]Front
VTR250 11-16 [Used in] Front
VTR250 98-06 [Used in]Front
V-TWIN MAGNA 94-07 [Used in]Front
XR400Motard 05-07 [Used in]Front
XR400Motard 08 Installed after removing the insulation plate and shims [Where used]Front
SHADOW400 97-07 [Used in]Front
SHADOW750 08 [Used in] Front
SHADOW750 97-03 [Used in]Front
SHADOWACE 96-00 [Used area]Front
Shadow aero 98-01 [Used in]Front
Shadow special 99 [Used at] Front
Shadow slasher750 00-03 [Used point]Front
Shadow slasher 00-06 [Used in]Front
Silver wing400 02-08 ABS [part used]Rear
Silver wing400 02-08 [Used in]Rear
Silver wing 01-08 ABS [part used]Rear
Silver wing 01-08 [Used in]Rear
Silver wingGT400 09 ABS [part used]Rear
Silver wingGT400 09 [Used in]Rear
Silver wingGT600 09 ABS [part used]Rear
Silver wingGT600 09 [Used in]Rear
STEED400 93 (NC26-120-) [part used] Front
STEED400VCL 96-97 [Used area]Front
STEED400VLX 93-02 [Used point]Front
STEED400VSE 96-97 [Used area]Front
STEED600 93-96 [Used area]Front
STEED 01 [Used at] Front
XELVIS 91 [Where used] Front
NIGHTHAWK250 92-99 [Used in] Front
NIGHTHAWK750 91-92 [Used area]Front
PC800 PACIFIC COAST 89-99 [Used point]Front double disk
FUSION 93-03 [Used point]Front
FUSION SE 94-06 [Used in]Front
FUSIONTypeX 03-06 [Used in]Front
FUSIONTypeXX 03-06 [Used in]Front
FREEWAY 93-99 [Used in]Front
MAGNA750 93 [Where used] Front
VALKYRIE 96-01 [Used point]Front double disk
VALKYRIE 96-01 [Used in]Rear
VALKYRIE TOURER 98-01 [Used point]Front double disk
VALKYRIE TOURER 98-01 [Used in]Rear
CB500F
CB500X
CBR500R
Rebel300
Tampilkan lebih banyak
DL250 V-STROM250 17-21 ABS [part used]Front
DL250 V-STROM250 17-21 [Where used]Front
GSF750 96-00 [Used point]Front double disk
GSR250 12-17 [Used point]Front
GSR250F 15 [Where used] Front
GSR250S 14-15 [Used point]Front
GSX250R 17-21 [Where used]Front
RF400R 93-97 [Used point]Front double disk
RF400RV 94-00 [Used point]Front double disk
GSX400 94-98 [Used point]Front double disk
GSX400Type S 94-96 [Used point]Front double disk
GEMMA 08 [Used in] Front
SKYWAVE650 burgman 02-08 *Remove the stock pad back plate [Where used]Front Double Disc
SKYWAVE650 burgman 04-18 ABS *Remove the stock pad back plate [Where used]Front Double Disc
Tampilkan lebih banyak
BW'S125 16-18 (YW125/X) GB11/12 [part used]Front
BW'S125X 16-18 GB11/12 [part used]Front
MT-01 05-06 (5YU1-4) [part used] Rear
CYGNUS X125SR FI 13-15 (1YP2-5) [part used] Front
CYGNUS X125SR FI 16-20 (BF9/B8S) [part used]Front
CYGNUS X 19-21 (B8S1/3/5) [part used]Front
MAJESTY125 01-03 Fi(Taiwan spec) [part used]Front
MAJESTY125 01-03 [Used point]Front
MAJESTYS 14-21 Installed at the same time as the stock shim [Location]Front
Tampilkan lebih banyak
Link Laman Model
- CBR250RR (2016-)
- Rebel 250
- FREEWAY
- FUSION (HELIX, SPAZIO, CN250)
- GB250 CLUBMAN
- CB250 JADE
- CB250 NIGHTHAWK
- VT250 SPADA
- VTR250 (MC33)
- V-TWIN MAGNA VT250C
- XELVIS
- CBR250R (2011-)
- CB250F (2014-)
- CBR300R
- Rebel 300
- Silver Wing GT400
- STEED400 VSE
- CB-1 (CB400F)
- CB400SF (Super Four)
- CL400
- VT400 SHADOW
- SILVER WING400 (SW-T400, FJS400)
- STEED400
- VRX400 ROADSTER
- XR400 Motard
- CBR400RR (NC29)
- CB400X
- CB400F (2013-)
- CBR400R
- CB400SS
- CB400 FOUR (water cooled)
- Rebel 500
- CBR500R
- CB500F
- CB500X (500X)
- CBF600S
- Silver Wing GT600
- CBR600F
- STEED600
- NC700S
- NC700X
- INTEGRA
- CB750
- Magna VF750
- CB750 NIGHTHAWK
- VT750 SHADOW
- NC750X
- NC750S
- NM4-01
- NM4-02
- SHADOW SLASHER750
- PC800 PACIFIC COAST
- ST1100 Pan-European
- VT1300CR Stateline
- VT1300CX FURY
- VT1300CS Sabre
- VALKYRIE (GL1500C, F6C)
- Shadow AERO (VT1100)
- GB350
- GB350S